I'm going to go get me some today.
Created on: 08/21/15 11:09 AM
Replies: 24
Badzx14r
Joined: 03/17/09
Posts: 1947
maverick1441
Joined: 09/13/13
Posts: 966
Badzx14r
Joined: 03/17/09
Posts: 1947
RE: WTF no racing
08/22/15 4:35 AM
track was packed got 2 passes in 2.5 hrs and I was there when the gates opened. my new fueling system is mess up.
data log showed 18.0 afr @ 100 tps with a 25% duty cycle on WOT came back put a lot more fuel to it. and it did nothing same readings. I don't know why the injectors are not loading to 80% or so !!! going to put the old setup back in and get a baseline then reinstall 1 part at a time until I find the cause.
maverick1441
Joined: 09/13/13
Posts: 966
Badzx14r
Joined: 03/17/09
Posts: 1947
maverick1441
Joined: 09/13/13
Posts: 966
Badzx14r
Joined: 03/17/09
Posts: 1947
RE: WTF no racing
08/23/15 12:44 PM
seem like my e85 after setting for 2 months with just starting the bike and light load cause stricken on the injectors to not open fully . I flushed with c16 and the injectors are working to full duty cycle now . in 6 years of e85 use this was the 1st that ever happen.
maverick1441
Joined: 09/13/13
Posts: 966
RE: WTF no racing
08/23/15 1:30 PM
Wow. Yea the ethanol blend crap we have in MS will gum up a carb in less than 2 months. I would guess that an 85% ethanol content would go bad even quicker. Glad you got it figured out and didn't hurt the motor running that lean. Where are you getting the fuel? I can't find any local.
Badzx14r
Joined: 03/17/09
Posts: 1947
RE: WTF no racing
08/23/15 9:43 PM
in Houston and Austin when I go I take a 40 gallon drum
if it had lean out on gas like that the motor would been toast . I'm sure I sand blasted the pistons and took a lot of life away but its still running
* Last updated by: Badzx14r on 8/23/2015 @ 9:45 PM *
maverick1441
Joined: 09/13/13
Posts: 966
RE: WTF no racing
08/24/15 5:17 PM
I'd do a leak down and see what you have. You'd be doing yourself a favor if you caught a leaky valve or burnt rings ahead of time. Hell your motor deserves a freshen up after having to haul your big ass around all the time.
* Last updated by: maverick1441 on 8/24/2015 @ 5:21 PM *
Badzx14r
Joined: 03/17/09
Posts: 1947
maverick1441
Joined: 09/13/13
Posts: 966
Badzx14r
Joined: 03/17/09
Posts: 1947
bgmagma10
Joined: 08/25/13
Posts: 165
RE: WTF no racing
08/26/15 2:26 PM
Hey, on the bright side, I did go the quickest 60" and 330" last week. We had the Roadkill TV show come through our track on their way across the U.S. I had just got a seat pan and wasn't finished fitting it yet, but said screw it and went out with it anyway. First pass I ripped the bolts right out of the tail, but thankfully the seat stayed in place, so I zip tied it as best I could and the next pass I popped both zip ties right on the hit and almost completely lost my seat. lol. I was able to steal the longer bolts from the little belly pan below the lowering links and it stayed on after that. Man... i'll say when my seat came off it was quite embarrassing. but at least I was able to stand up on the pegs and slide it back down.
bgmagma10
Joined: 08/25/13
Posts: 165
RE: WTF no racing
08/26/15 2:38 PM
Here is the video of my 8.68 pass, I bobbled 5th, didn't let off the throttle enough and barely hit the rev limiter in 1st. I hit the rev limiter more that night than I ever have in a night. I don't know what my deal was.
* Last updated by: bgmagma10 on 8/26/2015 @ 2:39 PM *
jimmymac
Location:
Joined: 07/02/14
Posts: 454
bgmagma10
Joined: 08/25/13
Posts: 165
Badzx14r
Joined: 03/17/09
Posts: 1947
bgmagma10
Joined: 08/25/13
Posts: 165
Badzx14r
Joined: 03/17/09
Posts: 1947
bgmagma10
Joined: 08/25/13
Posts: 165
Badzx14r
Joined: 03/17/09
Posts: 1947
maverick1441
Joined: 09/13/13
Posts: 966
Badzx14r
Joined: 03/17/09
Posts: 1947
RE: WTF no racing
09/10/15 9:59 AM
yeah dig up a flyer we always interested !!!
my shit is beginning to run good
I think there divisional races and grudgefest going on that weekend in dallas
* Last updated by: Badzx14r on 9/10/2015 @ 10:02 AM *
Badzx14r
Joined: 03/17/09
Posts: 1947
New Post
Please login to post a response.